Products |
Order
Products |
| Wind Power VAWT |
VERTICAL AXIS WIND TURBINES
Horizontal AXIS WIND TURBINES
Solar PV Panels
Water DC Generators
| INVERTERS |
| Warranty and Return policy Solar n Wind, Inc and its companies, systems are designed for Emergency, Backup Auxiliary aid Primary Source of Electricity. Each Power station is designed to give maximum efficiently to designs specification for each customer. Engineering aid design using available component for cost effectively aid reliability. Stations are State of the art aid longevity expectations up to 25 years have been calculated. Battery replacement every 10 years or per manufactures Each Energy Systems is designed to give electrical power for a specified time at specified use. Exceeding this power level can cause the system to shut down or specified alarms to sound. Recharge capabilities and stated charge times are always subject to change depending on conditions of sunlight, wind speed and water speed and Recharging capabilities of customers Source. Service orders, e-mail order returns shall be within 30 days of purchase, no exchange or return for special orders. Restocking fee of 15% shall apply. Normal orders for Electronics of system are sensitive to water, electrical, shock, vibration and other forces that might cause damage so precautions should be taken to provide adequate protection from these conditions including Dropping or hard bumping. California solar n wind guarantees workmanship and assembly only, individual component Warranties are depending on conditions and terms of specific manufacturer and must be subscribed to by customer. No refunds on special orders under any circumstances. We hold no liabilities for product components provided by supplier or its parent compatibles. Power Cells should be handled with care; this unit is Dry cell should always have proper precautions to prevent hazardous conditions. Dry cells are sealed to prevent leakage and off gassing but are subject to explosion damage unit should always be kept in a well-vented area or venting supplied. Batteries should be removed with transporting or unit should be secured properly. Power cells are heavy and can cause injury when lifting so take care when lifting either power unit and or Battery cells. Possible shock hazard can occur causing harm or even death dealing with Electrical power and the precautions and methods when using standard house current should be used when using power systems. All systems are per customer order California solar n wind is not responsible for delays in unit production due to back orders and other unforeseen conditions that might arise and be authorized to provide alternate components should these conditions arise. Service should be by authorized Solar or Electrical representative. Rebait program thru authorized solar dealer. Or certified electrical systems expert categorized with type C-10 contracting. Operation should be per manufacturing instructions only and should not be used with any other power generating units without proper transfer or interface connections performed by certified electricians only. Use of wind system should be always using precautionary measures for spinning devices. Wind systems should be elevated to a point not to come in contact with spinning blades or other turning mechanics. Wind generators must have a minimum speed to be effective and should not be used in severe weather conditions; system should be mounted or affixed for sturdy placement greater than force of wind. Wind systems provide electricity and should always cause reason to prevent shock hazard. Use of solar or PV, Photo Voltaic cells should be precaution from sun heat and can get hot. Prevent heat hazard iii a method applicable. Electrical hazard from PV should always be taken to prevent injury Contact Solar n Wind 2551 East Ave. S suite 228 G Palmdale, Ca. 93550 |
 | |  | |  | |  | |  | |  |
Products |
Products |
| HAWT |
| Hybrid power stations |
Products |
| Solar |
Products |
| Accessories |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |